Assembly

Step 1: Ensure the bed canvas is facing upwards. Install the small round rods into the four sides of the mat, ensuring the rod is the same size as the side of the canvas

Step 2: Slide the aluminium tubes onto the mat with the rods going into the extrusion. Ensure the Denali logo is facing upwards.  

Step 3: Install the four corners as shown. Loosely fasten the corners with the connectors and screws.

Note: Do not fasten tightly and ensure the end of the aluminium tubes are aligned with the groove in the corner bracket.

Step 4: Tighten all of the screws on the frame.

Step 5: Insert the legs into the corner brackets, ensuring the slot in the leg tube lines up with the screw hole in the corner bracket. You may need a lubricating substance to get the legs in if they are tight. We suggest even a light spray with a multi-purpose spray can do it. If you still have issues, safely use your body weight to stand/jump on the corners to get them in nice and tight.

Step 6: Fasten the small screws in the corner bracket.

For any assistance, please email us info@denalidogbeds.com.au and we would be happy to have someone call to help.